Sunday, March 14, 2010

BMW-M1 Hommage Concept

BMW-M1 Hommage Concept

Citing an unnamed insider "privy to BMW's plans," Auto car is reporting today that BMW's previously announced focus on green technology will yield the BMW Z10 ED, a flagship that will showcase new drive lines, electronics and body construction. The Z10 ED will be a two-seater costing around $105,000, developed by BMW's Technic division, and sold in limited numbers.


By utilizing its carbon fiber construction techniques, BMW intends the Z10 to weigh no more than 3,087 pounds. Moving forward from just carbon fiber body panels, BMW's engineers have found a way to combine several pieces of the frame into a single sub-assembly. They are also exploring integrated door frames and sill panels to lower curb weight and improve rigidity.

Engine possibilities include a high-pressure turbocharged direct-injected straight six-cylinder making a projected 400-hp. That engine could replace the 3.0-liter in the current BMW lineup. The engine has been conceived in two variations: a conventional mechanical valve system with BMW's VANOS variable valve timing, and another with an electronic valve control that allows a variable compression ratio.

The Z10 ED will also feature stop-start technology, a generator, and brake energy regeneration engineered to story energy in a lithium-ion battery. All of these technologies will filter down to the higher volume BMW models, if all goes according to plan.

BMW X6 UK Version

BMW X6 UK Version



In 1999 BMW broke the four-wheel-drive mould when it launched the X5 Sports Activity Vehicle. With a bias towards excellent on-road performance combined with a dynamic design and a premium interior, the BMW X5 was an instant success. And it's a winning formula that has, unlike most other models, led to increasing sales during its lifecycle with the biggest annual UK sales coming in its penultimate year. The timing of the BMW X5 was perfect and it reflected buyers' lifestyles and their desire for something unique in the marketplace.

The BMW X6 is a bespoke proposition, but one that competitors look set to copy…just like the BMW X5.

BMW X6 UK Version
The BMW X6 is undeniably a niche car with BMW UK expecting to sell approximately 1,600 X6s in its first year - by comparison an average of 7,000 X5s are sold every year.

Research has shown that three key buyer profiles exist:
A quartet of turbocharged engines
The BMW X6 xDrive35i is powered by the twin-turbocharged 2007 and 2008 International Engine of the Year winner that produces 306hp. This power plant is capable of propelling the X6 xDrive35i from zero to 62mph in 6.7 seconds and on to a top speed of 149mph. The 2,979cc-engined X6 is still capable of achieving a combined 25.9mpg and a CO2 figure of 262g/km.

The BMW X6 xDrive30d and the BMW X6 xDrive35d also both have award-winning power plants under their bonnets. The former, a single turbocharged unit produces 235hp from its 2,993cc block, while the latter ups the ante by offering 286hp from the same capacity engine but aided by twin-turbochargers.

The BMW X6 xDrive30d, which is likely to become the biggest selling X6 variant over time, reaches 62mph from zero in 8.0 seconds before going on to a top speed of 137mph. Emissions and economy figures are equally impressive, recording 217g/km and 34.4mpg respectively. The low CO2 output is enough for the car to qualify for a lower Vehicle Excise Duty band, compared to rival products, and continue to be an £8-a-day Congestion Charge vehicle in London should current proposals become statute.

The BMW X6 xDrive35d sprints from zero to 62mph in 6.9 seconds before going on to a top speed of 147mph. It too sits under the 225g/km higher Vehicle Excise Duty and Congestion Charge strata. The twin-turbocharged diesel records an emissions figure of 220g/km, while also being capable of 34.0mpg.


Completing the awesome foursome of power plants is a new twin-turbocharged, high-precision direct injection, 4.4-litre V8 engine producing 408hp. This all-new engine, not seen in any other BMW product before, is the most powerful production non-M BMW V8 engine ever and makes the flagship X6 the most powerful production X product. It can reach 62mph from standstill in 5.4 seconds - quicker than a Porsche Boxster - before going on to an electronically-limited top speed of 155mph.

Brake Energy Regeneration is standard across the range and combines with active aerodynamics and low viscosity fluids in the steering and transmission systems. Third-generation common-rail technology diesel-engined cars and high-precision direct injection on the petrol models both serve to optimise the combustion process.

A new high in dynamic capability
The power of the BMW X6 is harnessed by an advanced chassis that incorporates Dynamic Performance Control for the first time on a BMW. Dynamic Performance Control offers drivers class-leading cornering ability courtesy of a complex multi-clutch differential that, effectively, helps drive the vehicle around a bend.


A conventional differential wastes power through wheel slip during cornering. A limited-slip differential locks out an unloaded wheel to transfer drive to the wheel with most grip - but the locked wheel can act as a drag on performance.
The result, combined with one of the most advanced stability control systems available, is a vehicle that out performs the current benchmark BMW X5 and some sports cars in terms of dynamic capability.

Audi R8 Spyder 5.2 FSI quattro

Audi R8 Spyder 5.2 FSI quattro


Audi R8 Spyder 5.2 FSI quattro - exceptional performance and breathtaking dynamism coupled with the intense sensations of open-top driving. Its lightweight cloth top opens and closes fully automatically; several body parts are made of a carbon fiber composite material.

The top, which comprises an outer skin of a leakproof textile fabric and the headliner, is fully compatible with high-speed driving. When driving at moderate speeds with the top up, interior noise levels in the Audi R8 Spyder are barely higher than in the Coupé.

Close attention to detail: the design
Numerous details demonstrate that the Audi designers put their hearts into the design of the Audi R8 Spyder 5.2 FSI quattro. The air inlets in the nose, which direct air across the three radiators, and the lip of the front skirt are painted high-gloss black. The struts in the broad, low, single-frame grille are finely coated with chrome. The standard full-LED headlights are technical works of art.


Sporty luxury: the interior
The open-top two-seater from Audi features a generously spacious interior. The three-spoke leather multifunction sport steering wheel is flattened at the bottom as in a race car, and the low-mounted, electrically adjustable seats guide and support the body perfectly.

Quality of fit and finish is extraordinary and the controls are clear and logical. The standard driver information system includes a lap timer for recording lap times. The instruments and the gear lever knob feature red rings. The pedals, the footrests and the shift paddles of the optional R tronic are in aluminum look. Highlighting the list of standard equipment are a generous full-leather package featuring Fine Nappa leather, an excellent sound system from Bang & Olufsen, a deluxe automatic air conditioning system and heated seats. Six different interior colors are available.

Door sill strips coated with aluminum and adorned with black satin finish applications impart an air of luxurious sportiness. Three storage compartments are integrated into the rear bulkhead, one of which contains the optional CD changer or Audi music interface, if desired. There is a front compartment for 100 liters (3.53 cu ft) of luggage.

The latest version of the navigation system plus with MMI operating logic is also standard in the Audi R8 Spyder 5.2 FSI quattro. It features higher resolution and particularly fast route calculation. The system's most visible new feature is the high-resolution, 6.5-inch display.

Uncompromising power: the engine
The Audi R8 Spyder 5.2 FSI quattro, which was developed in cooperation with quattro GmbH, dazzles with uncompromising performance. The V10 engine with the aluminum crankcase, much of which is hand-built, follows in the grand motorsports tradition at Audi.

The 5.2-liter engine features FSI direct fuel injection. The high 12.5:1 compression ratio that this enables contributes to the high performance and good fuel efficiency. Equipped with a manual transmission, the Audi R8 Spyder 5.2 FSI quattro consumes an average of 14.9 liters of fuel per 100 km (15.79 US mpg) - a good figure given its power. With R tronic, this figure improves to 13.9 liters (16.92 US mpg). Dry sump lubrication, another motorsports technology, ensures that the supply of oil is maintained even at the maximum lateral acceleration of 1.2 g.

Dazzling performance: the chassis
The Audi R8 Spyder 5.2 FSI quattro has a 2.65-meter (8.69-ft) wheelbase and a 43:57 axle load distribution. Like in a race car, there are double triangular wishbones made of aluminum at all four wheels. The hydraulic rack-and-pinion power steering conveys highly precise road contact.

The chassis is tuned for good comfort, thanks in part to standard Audi magnetic ride technology. This uses magnetic fields in the shock absorbers to adjust their response to road conditions within milliseconds and adapt to the driver's style. The driver can choose between two base characteristics. A sports suspension with conventional shock absorbers is available as an option.

The Audi R8 Spyder 5.2 FSI quattro is built by quattro GmbH at the Neckarsulm plant. The vehicle, including the ASF, is largely hand-built. The open-top two-seater will be launched in Germany in the first quarter of 2010. Its base price 156,400 euros.

Toyota FT-EV II Concept

Toyota FT-EV II Concept



The Toyota FT-EV II Concept, a compact electric vehicle designed for short distance travel. Its design and technology look to a future society where EVs will be in common use, among a range of different means of transport that will reflect user requirements, the type of energy used and the local energy supply infrastructure.

Toyota FT-EV II Concept is a high-quality vehicle concept, designed primarily for urban driving with a body that is even more compact than that of the Toyota iQ, but still with room for four seats on board.

Drive-by-wire technology allows all the vehicle functions to be controlled using a joystick, including the accelerator, brakes and steering. Removing the throttle and brake pedals frees up legroom for the four-seat design.

The exterior features a low front cowl and an additional window below the level of the windscreen to give extra forward visibility. To improve safety through the quality of all-round vision, the rear lamp clusters are see-through LED units. To ensure easy access in tight spots, there are electric sliding doors on both sides.

Top speed is above 60mph and a full-charged battery will give a range of more than 50 miles, which is ample for most urban journeys. The ride is quiet and comfortable with smooth acceleration, thanks to Toyota-developed motor control technology, itself part of the hybrid system that sits at the heart of the company's environmental technologies.

Toyota FT-EV II Concept Dimensions
* Length: 2,730 mm
* Width: 1,680 mm
* Height: 1,490 mm
* Wheelbase: 1,900 mm

Toyota FT-HS Concept

Toyota FT-HS Concept



The Toyota FT-HS hybrid sports concept.

The FT-HS incorporates hybrid capability while maintaining sports car essentials, such as a sleek profile, lightweight aero-dynamic materials, and an advanced high-output powertrain for revolutionary acceleration and optimal performance. This 21st century sports car is fun-to-drive with eco-friendly benefits such as ultra-low emissions and fuel efficiency. The FT-HS appeals to an emerging buyer who grew up eco-conscious and perceives technology as a necessity, not a luxury.

This two-plus-two concept is a front-engine, rear-drive sports car with a projected zero-to-60 acceleration in the four-second range. A powerful V6, 3.5L-engine is coupled with a 21st century sports hybrid system with a target power output of approximately 400-horsepower. At a mid-priced market position, FT-HS would be a true "attainable exotic" with 21st Century performance.

FT-HS expresses the core values of a Toyota Brand design strategy that combines two key elements: J-Factor and Vibrant Clarity. J-Factor refers to the local and global acceptance of Japanese-inspired design and cultural sensibilities.

The exterior design was led by Calty designer, Alex Shen. From a design perspective, the theme of the FT-HS achieves sleek, taut surfaces in its exterior features - especially in the doors and body style. The front and rear have been sculpted to remove mass around key functional components. Freeform geometrics define the integration of fluid surfaces contrasting hard-edge "Aero-Corners" which promote smooth airflow and reduce turbulence.

The roof has a distinctive scooped-out section designed to reduce aerodynamic drag and provide head room at the key areas. Made from carbon fiber Kevlar, the roof retracts so that the roof panel and back window pivot fluidly in a downward motion to stow in the rear seat space.

The vehicle's triangular profile has a floating "C" pillar, aero corners, a full upper-body pan, and innovative open top. A hood features a scalloped channel, exposing the hybrid engine. Integrated component architecture can be seen in the aerospace-inspired lighting. The tail lamp unit spans the entire rear, and has an integrated retractable spoiler. Light-emitting diode (LED) clusters are located in the headlamps and the wing for energy-efficiency and decreased heat loss. Other exterior features include a speed-activated wing that elevates at high speed for additional stability and traction. The rear showcases a carbon fiber lower diffuser with integrated wide exhaust and carbon fiber wheels.


The driver-oriented interior was created by Calty designer, William Chergosky and exudes sleekness, technology, and performance. The lean skeletal look is achieved with exposed cross-car architecture and high-tech materials such as carbon fiber, and titanium. FT-HS' interior features create a dedicated driver's cockpit which include subtractive mass expressions such as cross-car instrument panel structure and delta wing driver pod.

By eliminating the "B" pillar and creating a suspended "C" pillar, the minimalist style works in conjunction with subtractive mass. An integrated instrument panel surrounds the driver, creating an enclosed pod effect. Armrests flow seamlessly into the door and surrounding interior.
Seating is optimized for a lightweight appearance and function: the seating accommodates four and then coverts to a two-seater when the roof retracts. The passenger-seat area is open with a simple exposed airbag on the cross-car beam.
A telescoping hub-less steering wheel incorporates semi-automatic paddle shifters and allows the meter to be shifted forward in order to shorten the driver's focus-time between the road and meter, and ultimately enhance driver focus.

Toyota FT-HS Concept Vehicle Preliminary Specifications Drivetrain
3.5 Liter V6 hybrid electric
DIMENSIONS (inches)
* Overall Length: 170.27
* Overall Width: 73.23
* Overall Height: 50.79
* Wheelbase: 104.33
Wheels: Carbon Fiber
Tire Sizes: Front 245/35R21 Rear 285/30R21

LinkWithin

Related Posts Plugin for WordPress, Blogger...