Sunday, December 26, 2010

Alfa Romeo 159 1750 TBi, 2010

Alfa Romeo 159 1750 TBi, 2010

 

The new 159 is designed to express a sporting yet seductive personality and boasts road holding and performance that set new standards for this class of car. Two new engines in particular (a 200 HP, 1750 cc turbocharged petrol engine and a 170 HP 2.0 JTDM diesel) place the Alfa Romeo 159, in the power range that accounts for over half of Alfa Romeo sales.

Under their fascinating and highly personal exterior, all Alfa Romeos a choice of superb engines, all packed with the latest technology and bursting with performance. Alfa Romeo engines are the perfect embodiment of the sporting soul that has always set the marque apart from the competition. The Alfa Romeo 159 is certainly no exception.

The new 1750 cc turbo petrol engine (manufactured by FPT - Fiat Powertrain Technologies) comes combined with a six speed manual gearbox and boasts advanced ignition control solutions including direct fuel injection, two continuously variable valve timing units, a turbocharger and a revolutionary scavenging control system. The resulting performance is comparable to - or better than - that of many 3 litre engines while still delivering fuel consumption typical of a compact four cylinder unit.

The force behind the development of any Alfa Romeo engine is the company's determination to use technology to enhance driving pleasure. This certainly applies to the development of the new, Euro 5, "1750 Turbo Benzina 200 CV" unit destined immediately for the Alfa Romeo 159 and later on for the Alfa Romeo Brera, Spider and 159 Sportwagon.

The engine takes the Alfa Romeo 159, with its refined Italian styling and typical sporting elegance to an impressive top speed of 235 kph and accelerates it from 0 to 100 kph in just 7.7 seconds. The 200 HP Alfa Romeo 159 1750 TBi is therefore a true representative of Alfa's exclusive motoring lifestyle. Far from being a mere 'means of transport', the new 159 is a real driver's car. It delivers genuine sports performance and muscular acceleration thanks to generous torque and smooth response even at low revs and the extended power band of a modern, advanced petrol engine that minimises the need for you to 'work' the gearbox. The engine sound too is inspiring without ever becoming tiresome.

Alfa Romeo 2uettottanta Concept, 2010

Alfa Romeo 2uettottanta Concept, 2010

 
 


To mark its 80th anniversary, Pininfarina proposes an "open" Alfa Romeo 2uettottanta Concept that is exciting and a delight to drive. For those who still like to dream in a car. For those looking for a mixture of vanity, entertainment, and the pleasure of life in the open air. For those who love icons as the greatest expression of the age we live in. For those who want their cars to be an uncommon sensory experience in terms of both style and driving, without being obsessed by performance. For those who want to be excited by a dynamic, sporty car that transmits the exclusiveness and refinement typical of an Alfa Romeo spider designed by Pininfarina.

2uettottanta: a name that evokes the legendary Duetto, but also the years of activity at Pininfarina, which launches the celebrations for its 80th anniversary with this concept car. And it has decided to do so with a type of car that is by definition, the work of Pininfarina: an Alfa Romeo spider. A very Italian product, which has become an export brand, representing the inexhaustible talent that the whole world associates with Italy.

The Alfa Romeo 2uettottanta Concept reflects Pininfarina's determination to look to the future with optimism following tradition, restating its excellence in design and its acknowledged capacity for aesthetic and technological innovation. It is a concept that represents an innovative approach, projected into the third millennium, to a topic that is firmly rooted in Pininfarina history, the 2-seater spider. And like the best Alfa Romeo sports cars to come from Pininfarina's pencil, the Alfa Romeo 2uettottanta Concept exalts the driving experience and concentrates on the excitement of being at the wheel of an open car with a great aesthetic personality. It is a car that can make people dream and excites even after many years. The icon of a lifestyle that harks back to a lively, tumultuous period. Like the Duetto of the Sixties, which helped to establish a trend based on the themes of rebellion and escape, thanks to the film "The Graduate".
Alfa Romeo 2uettottanta Concept

The Alfa Romeo 2uettottanta Concept is also a tribute to Alfa Romeo, which celebrates its centenary in 2010: the alliance between Alfa Romeo and Pininfarina is one of the most significant and durable in the history of the car, one of men and of passion, of design and cutting-edge technical solutions, which has generated an inestimable number of good-looking, innovative cars with plenty of temperament. With a predilection for sports cars and convertibles. The aim is to replicate all this with the Alfa Romeo 2uettottanta Concept. So a clean, elegant line was chosen for this "simple 2-seater", which is proposed with a 1750 cc turbo engine positioned longitudinally, an obvious reference to the "1750 Veloce" of 1968, one of the many versions derived from the famous "Osso di Seppia" (Cuttlefish). With its red bodywork, inspired by the typical Alfa Romeo paintwork, the 2uettottanta is 1797 mm wide, 4212.6 mm long, 1280 mm high and has a wheelbase of 2500 mm.

The pleasure of driving and feeling in harmony with nature is transformed into light, sleek, refined volumes, and shapes that seem to slip through the air easily. This generates the theme of this concept: the expression of a single volume, which is some way from the ground and suspended. The Alfa Romeo 2uettottanta Concept almost seems to lift up from the ground "going further". It is an optical effect achieved thanks to a line that crosses the whole car horizontally. An uninterrupted sign applied to dynamic, sporty proportions - typical of Alfa Romeo spiders - accentuated by the configuration of the passenger compartment, which is shifted significantly to the rear. The force of the design lies in its exaltation of simplicity, which does not need to show its muscles but concentrates purely on agility and harmony.

The front end of the Alfa Romeo 2uettottanta Concept underlines its true Alfa Romeo character. The design is simple, with a central line that runs smoothly along the nose of the car, while the execution of the surfaces is more sophisticated. At the centre, in full view, and anything but a purely decorative element, is the Alfa Romeo shield, which seems to emerge from the heart of the car and to stretch outwards, in Pininfarina's futuristic, three-dimensional approach. The shield is made of aluminium and incorporates floating horizontal flaps. On either side are the two triangular lateral air intakes. The two elements impressed on the imposing bonnet create a natural link between the logo and the large windscreen, which has been designed as a ring in hand-beaten aluminium that emerges from the body of the car without interrupting its flow. The front headlights, which adopt the latest LED technologies, are embedded under the line that gives the whole car its character. A strip of carbon in the lower part of the front acts as an air splitter, channelling the air to the rear end of the car.

The side view of the car, where the theme of the single volume is repeated, highlights the flowing line of the whole, with the shapes merging naturally. The horizontal line "cut" into the sides gives a sense of great dynamism; it starts from the front wheelarch and extends back to the rear wheel. Like an athlete, for a car, being slim also means achieving aerodynamic efficiency. Pininfarina has always strived for natural shapes that can convey efficiency and respect of the environment, an approach confirmed by its great commitment to the theme of eco-sustainable mobility. The Alfa Romeo 2uettottanta Concept is in perfect harmony with nature, becoming the formal expression of a response to the needs of our day: it is an arrow that flies through the wind almost without encountering resistance.

Smooth, essential, soft surfaces even at the rear, which echoes the front, albeit with slightly more emphasis on the muscles. The design combines stylistic simplicity with a strong character in the volumes and proportions, with details designed to underline the car's dynamic, light personality. The two bumps seem to emerge from the volume, becoming floating wings that create the roll-over bars behind the seats. At either end, these bars generate an appendix designed to hold the seat belts. Even at the rear the light clusters are slender and embedded under the line that defines the whole section.

Great attention went into the design of the interior. The result is a spacious, comfortable passenger compartment, conceived with light, dynamic volumes, which envelop the occupants in a strong, reassuring embrace. The shapes are sewn into the leather, incorporating the touch controls: in its functions, the Alfa Romeo 2uettottanta Concept is faithful to its vocation as a car designed to be a delight to drive. The facia extends fluidly to the sides merging into the doorway as the natural continuation of the volume of the car, thus creating a perfect symbiosis between exterior and interior. The dashboard has a driver-oriented configuration with an innovative approach to the classical circular Alfa Romeo "tubes" that contain the instruments. The tunnel contains the Alfa DNA gear selector in an ergonomic position; this varies the set-up of the car in three modes, Dynamic, Normal and All Weather, adapting the behaviour of the various systems on the vehicle (engine, transmission, suspension, steering, brakes, etc.) to the demands of the driver and the different driving conditions. The tunnel runs through the passenger compartment and it gives structure to the chassis, revealing the carbon elements: the choice of this material reflects Pininfarina's constant research into alternative materials that can make vehicles lighter, reducing consumption and emissions. Another strong element of the interior is the steering wheel, which is a modern interpretation of the Duetto's perforated three-spoke wheel, with the addition of a shift paddle for sequential control of the dual-clutch gearbox. An enjoyable drive and comfort are also guaranteed by the anatomical sporty seats. All the interior of the car "floats": the ventilation ducts are positioned between the passenger compartment and the hull.

The size and design of the tyres, which were created specifically for the Alfa Romeo 2uettottanta Concept in collaboration with Dunlop, accentuate the impression of strong character and force given by the car. The tyres are of the low profile type, right on the extreme edges of the plane view: designed by Pininfarina to incorporate the innovative technologies developed by Dunlop, their graphics reflect those of the car. Their aerodynamic shape and very smooth lateral profile, guarantee better roadholding and less resistance to air, thus reducing consumption. The rims are treated in aluminium in harmony with the rest of the car, and are a free interpretation of the classic five-circle Alfa Romeo pattern, revealing the high performance carbo-ceramic Alfa Romeo brakes by Brembo.

The Alfa Romeo 2uettottanta Concept is not a pure styling exercise, but also a project and research: the goal is to grasp the spirit of the spider in the configuration, the proportions and the conception of the car as well as in its stylistic imprint. This working method is part of Pininfarina's genes. For this project, the Pininfarina creative team were given carte blanche to express the values inherent in the Alfa spider "by Pininfarina", the values that are deemed to have made the Giulietta Spider or the Duetto all-time classics. To achieve this result, the car was given a particular set-up, with a low centre of gravity and a passenger compartment that is very exposed so as not to isolate the occupants from the surrounding environment. The result is to bring the road "nearer" to the eyes of the driver and to increase the sense of dynamism even at low speed.

What is the 2uettottanta effect? Desire. Whoever sees it "must" possess it, drive it, enjoy it. Because the 2uettottanta is not an unattainable dream. Nor does the 2uettottanta only want to impress at first glance, but to achieve a beauty that does not strive solely for immediate confirmation, but gradually reveals all its values and transfers them to the future, making the style eternal. As it did in the case of the Duetto, which continues to be celebrated as an icon of design after more than 40 years.

Alfa Romeo MiTo UK Version, 2009

Alfa Romeo MiTo UK Version, 2009

 
 


Front on, the new addition to the range is every inch an Alfa Romeo. The instantly recognisable shield-shaped grille denotes the lineage of the Alfa Romeo MiTo and the shape of the bonnet and the headlamps pay homage to the Alfa 8C Competizione.

TURISMO
The standard specification list is long and comprehensive, featuring Alfa's advanced DNA function along with the Q2 system and electric power assisted steering. In addition, this model is fitted with Vehicle Dynamic Control - an amalgamation of ABS, Anti Slip Regulation and Brake Assistant - plus Hill Holder as standard.

Other safety features include driver, passenger, front side, window and driver's knee airbags, along with fast-reaction LED rear lights and a fire prevention system. The front passenger airbag can also be deactivated.

The LED rear lights complement the height adjustable follow-me-home headlights with titanium grey surrounds, electrically adjustable and heated colour-coded door mirrors and bumpers.

All Alfa Romeo MiTo Turismo versions come with 16" wheels with unique design trims and 195/55 tyres.
Inside the cabin, driver and passengers benefit from manual air conditioning, electric one-touch window operation plus an RDS radio with CD and MP3 reader. There's also an 'auto-close' system to complement the Alfa code immobiliser and alarm system.

Drivers can choose two different cabin colours. A Sprint Black dashboard is complemented by black / grey cloth and a Sprint Red dashboard comes with a black / red cloth combination.

RIDE AND HANDLING - SUSPENSION
Key to the sporting ride and handling characteristics of the Alfa Romeo MiTo is the suspension layout.
Two tried and tested set-ups have been employed - a MacPherson layout at the front and a semi-independent layout with torsion beam at the rear.
In particular, some key elements have been incorporated to give an exclusive feel to the Alfa Romeo MiTo chassis.

To emphasise the promptness of response, stability and control, even under extreme conditions, MiTo's track widths are among the widest in the segment - 1483mm front and 1475mm rear.

The wheel rims are also wide in relation to the size of the tyres in order to optimise the latter's handling performance. The stiff, front and rear springs give the vehicle a sporting yet pliant ride, and the torsion beam features high torsional stiffness to enable it to also act as an anti-roll bar, thereby ensuring optimum roll performance and helping maximise the promptness of response.

However, the most distinctive feature of the Alfa Romeo MiTo suspension is that the front and rear dampers feature coilover springs fitted inside the shock absorber that act in parallel with the main spring during extension travel, with the main purpose of reducing roll and increasing chassis response. Special dual-acting telescopic hydraulic dampers are fitted as standard on all versions.

ENGINES
Three petrol engines - 1.4 16V (95bhp), 1.4 TB (120bhp) and 1.4TB (155bhp) - plus two diesel engines - 1.3 JTDM (90bhp) and 1.6 JTDM (120bhp) - will become available from launch.

Four units are mated to a 6-speed manual gearbox to deliver a punchy, responsive, driving experience, and the remaining engine (1.4 120bhp) is coupled with an equally impressive 5-speed 'box.
Distinguished by its performance, eager throttle response, low fuel consumption, durability and reliability, the new 1.4 turbocharged petrol engine powers two of the five models in the petrol line-up, with two different power outputs.

1.4 16V 95bhp
The entry level - normally aspirated - petrol unit can be specified with each of the three trim levels to deliver a spirited and willing performance.

Developing 95bhp at 6000rpm and a maximum 129Nm of torque at 4500rpm, the 1.4 16V engine is capable of accelerating the Alfa Romeo MiTo from 0-62mph in 11.2 seconds, and on to a top speed of 112mph.
An ideal partner for relaxed, around town driving, this petrol engine is mated to a 6-speed manual gearbox to make longer, motorway journeys more economical and relaxed.
Official mpg figures reveal that in urban driving, the Alfa Romeo MiTo 1.4 16V covers 36.7mpg, while long journeys will push that fuel consumption figure to 58.9mpg. The combined figure is a creditable 47.9mpg.

CO2 emissions are 138g/km and put the Alfa Romeo MiTo 1.4 16V in tax band C.

1.4 TB 120bhp Turbopetrol

New to the Alfa Romeo range, and available with all three trim levels, is a 1.4 turbocharged unit that delivers enhanced levels of driving flexibility and lively performance.

Responsive and satisfying to drive, the new 1.4 TB engine is enhanced by the low inertia of the turbocharger that makes it possible to obtain maximum performance from a throttle command, without the annoying lag typical of this type of engine.
Throttle control for this unit (and the 155bhp version) is drive-by-wire, without any mechanical connection, so that the driver can obtain the desired response from the engine with the greatest energy efficiency.

The 0-62mph sprint takes 8.8 seconds, and in fifth gear, a top speed of 123mph can be attained - impressive figures that have previously been associated with larger engines.

This 1.4 TB unit develops its maximum power of 120bhp at 5000rpm but, more impressively, produces a generous 206Nm of torque at just 1750rpm.
In turn, these characteristics help the Alfa Romeo MiTo to achieve 34.9mpg around town and 56.5mpg in the extra urban cycle, plus a combined figure of 46.3mpg.
CO2 emissions of 145g/km put the Alfa Romeo MiTo 1.4 TB 120bhp in tax band C.

1.4 TB 155bhp Turbopetrol

Only available on Lusso and Veloce versions, the new 1.4TB 155bhp unit is the top performing petrol engine in the Alfa Romeo MiTo range, delivering its maximum power at 5500rpm along with a maximum torque of 230 Nm at 3000rpm.

Quickest of the Alfa Romeo MiTo launch range, this version can accelerate from 0-62mph in just 8.0 seconds and reach a top speed of 134mph.

Despite the increase in power and performance, fuel economy remains notably competitive.
Around town, drivers can achieve 33.2mpg, while motorway journeys and the combined cycle are 53.3 and 43.5mpg respectively.
A CO2 rating of 153g/km puts the Alfa Romeo MiTo 1.4TB 155bhp in tax band D.

1.3 JTDM 90bhp

The latest generation JTDM engines are trailblazing diesel technology and Alfa Romeo is now bringing that expertise to the sporty compact car sector.

1.6 JTDM 120bhp

Representing class-leading diesel technology, this Euro 5-ready 1.6 JTDM 120bhp engine delivers a massive 320Nm of torque at just 1750rpm.

As a result, the engine is perfectly matched for drivers wanting an effective combination of low running costs with useable power and flexibility for authentic driving satisfaction.

Alfa Romeo's new injection system with new-generation variable geometry turbo engines along with the most advanced exhaust gas treatment technologies - Close Coupled Diesel Particulate Filter and an integral EGR (Exhaust Gas Recirculation) system - improves control of temperature and gas flow, simultaneously guaranteeing lower emissions and low fuel consumption.

Alfa Romeo MiTo GTA Concept, 2009

Alfa Romeo MiTo GTA Concept, 2009

 


The Alfa Romeo MiTo GTA Concept, a high performance concept of the new Alfa Romeo MiTo. Designed using the experience gained with the Alfa Romeo 8C Competizione and 8C Spider, the Alfa Romeo MiTo GTA Concept shares with the exclusive "supercar" the philosophy based on achieving the greatest driving pleasure, resulting from exceptional agility produced by a power-to-weight ratio worthy of a racing car.

In line with the famous GTA (Gran Turismo Alleggerito) signature, (Alleggerito means reduced weight in Italian), the Alfa Romeo MiTo GTA Concept prioritises weight reduction, and the achievement of an optimum power-to-weight ratio.
Considerable work has gone into lowering the vehicle's centre of gravity; thus certain components such as the tailgate spoiler, roof and mirror fairings are in carbon-fibre; while aluminium is used extensively in the braking system, suspension, and some parts of the chassis.
Under the bonnet, an exciting new petrol engine, very much in keeping with the pre-requisites of downsizing, environmental awareness, and the offer of high power and efficiency in return for low weight and optimised packaging, powers the Alfa Romeo MiTo GTA Concept.

Designed by Fiat Powertrain Technologies and exploiting the vast experience gained in the production of Twin Spark and Alfa V6 road and race engines, the compact new petrol engine employs advanced technical solutions including direct injection, dual variable valve timing, state-of-the-art turbocharging and advanced electronic management systems to produce a remarkable 240bhp from just 1742cc.

Under-floor aerodynamics have been a particular concern, while the entire car has been lowered by some 20mm. Front suspension employs new geometry with aluminium leading arms, while the rear suspension has all-new bushings, and the comprehensively revised chassis boasts an 'active' suspension system, (advanced damper control), which counteracts the transfer of load under acceleration, stiffening the rear end and maximising traction. The Alfa Romeo MiTo GTA Concept's suspension also interacts with the braking system and steering to obtain the most efficient control of vehicle dynamics, while a 'Sky-Hook' function ensures an excellent level of passenger comfort under conditions of everyday use.

Alfa Romeo Brera S, 2009

Alfa Romeo Brera S, 2009


 

The Alfa Romeo is planning for the new, limited edition Alfa Romeo Brera S.
After a year of intensive suspension and chassis development at Prodrive, the world-leading motorsport specialist, the result is a sports coupe that subtly enhances all that is good about the original Alfa Romeo Brera, while bestowing it with outstanding driver feedback and handling.

Power comes from a choice of two existing direct injection petrol engines - the 185 bhp 2.2 JTS and the 260 bhp 3.2 V6 JTS.
Briefed to make the Alfa Romeo Brera S less of a long-distance tourer and more sporty on UK roads, the engineering team at Prodrive developed a unique suspension set-up. Prodrive engineers meticulously experimented with spring rates and ride heights to match the reduced weights of the 2008 model year Alfa Breras. Then followed an extensive damper tuning exercise to achieve the desired ride/handling balance and steering response required by driving enthusiasts in the UK.

The sports car driving experience is achieved by reducing roll and pitch, flattening the cornering attitude, and subsequently instilling confidence-inspiring steering.
To reduce roll and pitch and achieve an even flatter cornering attitude, Prodrive commissioned bespoke Eibach coil springs and Bilstein dampers.
Spring rates are increased by over 50 per cent compared to the standard Alfa Brera, giving the car a more nimble and agile feel, while the specially tuned gas-filled mono-tube dampers give tighter body control. A careful balance has been created to maintain good compliance over ridges and bumps in the road.

At the same time, the suspension static geometry has also been revised to optimise steering and handling. These changes, together with new 19" alloy wheels and Pirelli PZero Nero tyres, have created a more responsive turn-in to corners, with increased driver feedback, allowing the driver to explore the dynamic limits of the car.
To further enhance suspension geometry, the cars have been lowered by 10 mm front and rear. This lower centre of gravity helps reduce roll and improve cornering and braking performance. In addition, the lowered suspension gives the Alfa Romeo Brera S a more purposeful stance.

At each corner of the Alfa Romeo Brera S, unique Alfa Romeo 8C Competizione-inspired, lightweight 19" alloy wheels have been fitted. Although the wheels are eye-catching, the all-new design was commissioned by Prodrive primarily for performance, rather than just cosmetic appeal. The reason is unsprung weight - the weight carried by the car on the 'road side' of the spring and shock absorber. This plays a significant role in the way the car steers, handles and transmits feedback to the driver.
The lighter the wheel, the better it tracks undulations in the road surface without requiring heavy damping to control it. The unsprung weight has been further reduced by the adoption of hollow anti-roll bars and aluminium suspension components from the Factory.
As a result, the weight of both Alfa Romeo Brera S models is lower than the rest of the range. The front-wheel drive 3.2 V6 JTS is almost 100 kg lighter than the Q4 version and the 2.2 JTS version weighs 35 kg less.
The Alfa Romeo Brera S also sounds different from the standard range. The original characteristic growl of the V6 has been enhanced by careful redesign of the rear silencers. Thanks to a Holmholtz resonator connected in tandem with each silencer, the 2.2 JTS model now emits a sportier yet refined burble.

The exhaust has been altered to mirror the shape of the rear lights. Finished with chrome embellishers, they feature a Prodrive logo on the tailpipe exterior. This is just one of several subtle exterior enhancements to the award-winning Alfa Romeo Brera, including Prodrive branded front stone deflectors, and a bespoke red 'S' or 'SV6' on the C-pillar.
Inside the 3.2 V6 JTS Alfa Romeo Brera S, changes are more obvious. Not only are the supportive sports seats upholstered in soft black Frau® leather with red stitching, so are the dashboard fascia, door panels, steering wheel and gearlever. The centre console and instruments are faced in a dark finish. This interior can also be specified on the 2.2 JTS version.

Foot pedals are fashioned from drilled aluminium and the headrest recess houses a limited edition Brera S aluminium plate, featuring the flags of Italy and Britain.
For the record, the 2.2 JTS and 3.2 V6 JTS Alfa Romeo Brera S can reach 62 mph from rest in 8.6 and 7.0 seconds respectively, on the way to maximum speeds of 139 and 155 mph.

Alfa Romeo 159 Sportwagon, 2009

Alfa Romeo 159 Sportwagon, 2009

 

 


Alfa Romeo 159 is an exclusive sedan combining refined Italian style with the "elegant sportiness" of Alfa Romeo. The Alfa Romeo 159 Sportwagon on the other hand combines the style, performance and handling of a genuine sports car with the flexibility of use and luggage space versatility of a prestigious station wagon.

The versions exhibited offer two new Euro 5 compliant engines which will be available from the beginning of April: the 1.75 liter 200 HP TBi engine and the 2.0 liter 170 HP JTDM engine. In detail, the Alfa Romeo 159 is fitted with the new 1.75 liter TBi engine (Euro 5) - maximum output 200 HP from 4750 to 5500 rpm and maximum torque of 320 Nm at 1400 rpm - giving it a maximum speed of 235 km/h and acceleration of 0 to 100 km/h in barely 7.7 seconds.

The powerful Alfa Romeo 159 sedan is offered in the TI sporting version, featuring lowered geometry, bigger tires, 19 inch alloy rims, miniskirts and large aluminum brakes with red calipers. So, a very determined-looking car with a decidedly "ground-hugging" look. Inside, the TI environment is recognizable from the shaped sports seats in perforated leather with the Alfa Romeo logo stitched in red, plus the steering wheel with sports grip and the gear knob covered in leather with red stitching.

The internal coverings are black and the insignia are in "brushed dark aluminum". The same impression of sportiness appears in the instrument panel graphics, the pedals and the aluminum scuff plate with TI logo. Finally, this particular version comes with high-end equipment including triple-zone climate control, VDC system with Electronic Q2, Blue&Me Nav GPS and entertainment system, Bose Hi-Fi system and Cruise Control.

Next to this car, the public can admire an Alfa Romeo 159 Sportwagon equipped with the new 2.0 liter 170 HP JTDM engine (Euro 5). With this engine, the car can reach 216 km/h and takes 9 seconds to accelerate from 0 to 100 km/h. The version displayed at Geneva is a Sport which is differentiated from the outside by the exclusive 18 inch alloy rims with the new "Turbine" design.

Inside,
the eye is caught by the sports steering wheel with radio commands, the gear knob covered in leather with black stitching and the new sports seats covered in leather. Giving a further impression of sportiness, the head lining, the parcel shelf and the pillar fairings are black, while the badges are in "brushed aluminum" and the instrument panel employs "sporty" graphics. Finally, the equipment (standard and optional) offered on this car is very high-spec: triple-zone climate control, Cruise Control, VDC system (with Electronic Q2), Bose Hi-Fi system, GPS system (with telephone and voice commands), and Visibility Pack (rain, mist and twilight sensors).

LinkWithin

Related Posts Plugin for WordPress, Blogger...