Alfa Romeo 159 1750 TBi, 2010

Alfa Romeo 159 1750 TBi, 2010

 

The new 159 is designed to express a sporting yet seductive personality and boasts road holding and performance that set new standards for this class of car. Two new engines in particular (a 200 HP, 1750 cc turbocharged petrol engine and a 170 HP 2.0 JTDM diesel) place the Alfa Romeo 159, in the power range that accounts for over half of Alfa Romeo sales.

Under their fascinating and highly personal exterior, all Alfa Romeos a choice of superb engines, all packed with the latest technology and bursting with performance. Alfa Romeo engines are the perfect embodiment of the sporting soul that has always set the marque apart from the competition. The Alfa Romeo 159 is certainly no exception.

The new 1750 cc turbo petrol engine (manufactured by FPT - Fiat Powertrain Technologies) comes combined with a six speed manual gearbox and boasts advanced ignition control solutions including direct fuel injection, two continuously variable valve timing units, a turbocharger and a revolutionary scavenging control system. The resulting performance is comparable to - or better than - that of many 3 litre engines while still delivering fuel consumption typical of a compact four cylinder unit.

The force behind the development of any Alfa Romeo engine is the company's determination to use technology to enhance driving pleasure. This certainly applies to the development of the new, Euro 5, "1750 Turbo Benzina 200 CV" unit destined immediately for the Alfa Romeo 159 and later on for the Alfa Romeo Brera, Spider and 159 Sportwagon.

The engine takes the Alfa Romeo 159, with its refined Italian styling and typical sporting elegance to an impressive top speed of 235 kph and accelerates it from 0 to 100 kph in just 7.7 seconds. The 200 HP Alfa Romeo 159 1750 TBi is therefore a true representative of Alfa's exclusive motoring lifestyle. Far from being a mere 'means of transport', the new 159 is a real driver's car. It delivers genuine sports performance and muscular acceleration thanks to generous torque and smooth response even at low revs and the extended power band of a modern, advanced petrol engine that minimises the need for you to 'work' the gearbox. The engine sound too is inspiring without ever becoming tiresome.

Alfa Romeo 2uettottanta Concept, 2010

Alfa Romeo 2uettottanta Concept, 2010

 

 

To mark its 80th anniversary, Pininfarina proposes an "open" Alfa Romeo 2uettottanta Concept that is exciting and a delight to drive. For those who still like to dream in a car. For those looking for a mixture of vanity, entertainment, and the pleasure of life in the open air. For those who love icons as the greatest expression of the age we live in. For those who want their cars to be an uncommon sensory experience in terms of both style and driving, without being obsessed by performance. For those who want to be excited by a dynamic, sporty car that transmits the exclusiveness and refinement typical of an Alfa Romeo spider designed by Pininfarina.

2uettottanta: a name that evokes the legendary Duetto, but also the years of activity at Pininfarina, which launches the celebrations for its 80th anniversary with this concept car. And it has decided to do so with a type of car that is by definition, the work of Pininfarina: an Alfa Romeo spider. A very Italian product, which has become an export brand, representing the inexhaustible talent that the whole world associates with Italy.

The Alfa Romeo 2uettottanta Concept reflects Pininfarina's determination to look to the future with optimism following tradition, restating its excellence in design and its acknowledged capacity for aesthetic and technological innovation. It is a concept that represents an innovative approach, projected into the third millennium, to a topic that is firmly rooted in Pininfarina history, the 2-seater spider. And like the best Alfa Romeo sports cars to come from Pininfarina's pencil, the Alfa Romeo 2uettottanta Concept exalts the driving experience and concentrates on the excitement of being at the wheel of an open car with a great aesthetic personality. It is a car that can make people dream and excites even after many years. The icon of a lifestyle that harks back to a lively, tumultuous period. Like the Duetto of the Sixties, which helped to establish a trend based on the themes of rebellion and escape, thanks to the film "The Graduate".
Alfa Romeo 2uettottanta Concept

The Alfa Romeo 2uettottanta Concept is also a tribute to Alfa Romeo, which celebrates its centenary in 2010: the alliance between Alfa Romeo and Pininfarina is one of the most significant and durable in the history of the car, one of men and of passion, of design and cutting-edge technical solutions, which has generated an inestimable number of good-looking, innovative cars with plenty of temperament. With a predilection for sports cars and convertibles. The aim is to replicate all this with the Alfa Romeo 2uettottanta Concept. So a clean, elegant line was chosen for this "simple 2-seater", which is proposed with a 1750 cc turbo engine positioned longitudinally, an obvious reference to the "1750 Veloce" of 1968, one of the many versions derived from the famous "Osso di Seppia" (Cuttlefish). With its red bodywork, inspired by the typical Alfa Romeo paintwork, the 2uettottanta is 1797 mm wide, 4212.6 mm long, 1280 mm high and has a wheelbase of 2500 mm.

The pleasure of driving and feeling in harmony with nature is transformed into light, sleek, refined volumes, and shapes that seem to slip through the air easily. This generates the theme of this concept: the expression of a single volume, which is some way from the ground and suspended. The Alfa Romeo 2uettottanta Concept almost seems to lift up from the ground "going further". It is an optical effect achieved thanks to a line that crosses the whole car horizontally. An uninterrupted sign applied to dynamic, sporty proportions - typical of Alfa Romeo spiders - accentuated by the configuration of the passenger compartment, which is shifted significantly to the rear. The force of the design lies in its exaltation of simplicity, which does not need to show its muscles but concentrates purely on agility and harmony.

The front end of the Alfa Romeo 2uettottanta Concept underlines its true Alfa Romeo character. The design is simple, with a central line that runs smoothly along the nose of the car, while the execution of the surfaces is more sophisticated. At the centre, in full view, and anything but a purely decorative element, is the Alfa Romeo shield, which seems to emerge from the heart of the car and to stretch outwards, in Pininfarina's futuristic, three-dimensional approach. The shield is made of aluminium and incorporates floating horizontal flaps. On either side are the two triangular lateral air intakes. The two elements impressed on the imposing bonnet create a natural link between the logo and the large windscreen, which has been designed as a ring in hand-beaten aluminium that emerges from the body of the car without interrupting its flow. The front headlights, which adopt the latest LED technologies, are embedded under the line that gives the whole car its character. A strip of carbon in the lower part of the front acts as an air splitter, channelling the air to the rear end of the car.

The side view of the car, where the theme of the single volume is repeated, highlights the flowing line of the whole, with the shapes merging naturally. The horizontal line "cut" into the sides gives a sense of great dynamism; it starts from the front wheelarch and extends back to the rear wheel. Like an athlete, for a car, being slim also means achieving aerodynamic efficiency. Pininfarina has always strived for natural shapes that can convey efficiency and respect of the environment, an approach confirmed by its great commitment to the theme of eco-sustainable mobility. The Alfa Romeo 2uettottanta Concept is in perfect harmony with nature, becoming the formal expression of a response to the needs of our day: it is an arrow that flies through the wind almost without encountering resistance.

Smooth, essential, soft surfaces even at the rear, which echoes the front, albeit with slightly more emphasis on the muscles. The design combines stylistic simplicity with a strong character in the volumes and proportions, with details designed to underline the car's dynamic, light personality. The two bumps seem to emerge from the volume, becoming floating wings that create the roll-over bars behind the seats. At either end, these bars generate an appendix designed to hold the seat belts. Even at the rear the light clusters are slender and embedded under the line that defines the whole section.

Great attention went into the design of the interior. The result is a spacious, comfortable passenger compartment, conceived with light, dynamic volumes, which envelop the occupants in a strong, reassuring embrace. The shapes are sewn into the leather, incorporating the touch controls: in its functions, the Alfa Romeo 2uettottanta Concept is faithful to its vocation as a car designed to be a delight to drive. The facia extends fluidly to the sides merging into the doorway as the natural continuation of the volume of the car, thus creating a perfect symbiosis between exterior and interior. The dashboard has a driver-oriented configuration with an innovative approach to the classical circular Alfa Romeo "tubes" that contain the instruments. The tunnel contains the Alfa DNA gear selector in an ergonomic position; this varies the set-up of the car in three modes, Dynamic, Normal and All Weather, adapting the behaviour of the various systems on the vehicle (engine, transmission, suspension, steering, brakes, etc.) to the demands of the driver and the different driving conditions. The tunnel runs through the passenger compartment and it gives structure to the chassis, revealing the carbon elements: the choice of this material reflects Pininfarina's constant research into alternative materials that can make vehicles lighter, reducing consumption and emissions. Another strong element of the interior is the steering wheel, which is a modern interpretation of the Duetto's perforated three-spoke wheel, with the addition of a shift paddle for sequential control of the dual-clutch gearbox. An enjoyable drive and comfort are also guaranteed by the anatomical sporty seats. All the interior of the car "floats": the ventilation ducts are positioned between the passenger compartment and the hull.

The size and design of the tyres, which were created specifically for the Alfa Romeo 2uettottanta Concept in collaboration with Dunlop, accentuate the impression of strong character and force given by the car. The tyres are of the low profile type, right on the extreme edges of the plane view: designed by Pininfarina to incorporate the innovative technologies developed by Dunlop, their graphics reflect those of the car. Their aerodynamic shape and very smooth lateral profile, guarantee better roadholding and less resistance to air, thus reducing consumption. The rims are treated in aluminium in harmony with the rest of the car, and are a free interpretation of the classic five-circle Alfa Romeo pattern, revealing the high performance carbo-ceramic Alfa Romeo brakes by Brembo.

The Alfa Romeo 2uettottanta Concept is not a pure styling exercise, but also a project and research: the goal is to grasp the spirit of the spider in the configuration, the proportions and the conception of the car as well as in its stylistic imprint. This working method is part of Pininfarina's genes. For this project, the Pininfarina creative team were given carte blanche to express the values inherent in the Alfa spider "by Pininfarina", the values that are deemed to have made the Giulietta Spider or the Duetto all-time classics. To achieve this result, the car was given a particular set-up, with a low centre of gravity and a passenger compartment that is very exposed so as not to isolate the occupants from the surrounding environment. The result is to bring the road "nearer" to the eyes of the driver and to increase the sense of dynamism even at low speed.

What is the 2uettottanta effect? Desire. Whoever sees it "must" possess it, drive it, enjoy it. Because the 2uettottanta is not an unattainable dream. Nor does the 2uettottanta only want to impress at first glance, but to achieve a beauty that does not strive solely for immediate confirmation, but gradually reveals all its values and transfers them to the future, making the style eternal. As it did in the case of the Duetto, which continues to be celebrated as an icon of design after more than 40 years.

Alfa Romeo MiTo UK Version, 2009

Alfa Romeo MiTo UK Version, 2009

 

 

Front on, the new addition to the range is every inch an Alfa Romeo. The instantly recognisable shield-shaped grille denotes the lineage of the Alfa Romeo MiTo and the shape of the bonnet and the headlamps pay homage to the Alfa 8C Competizione.

TURISMO
The standard specification list is long and comprehensive, featuring Alfa's advanced DNA function along with the Q2 system and electric power assisted steering. In addition, this model is fitted with Vehicle Dynamic Control - an amalgamation of ABS, Anti Slip Regulation and Brake Assistant - plus Hill Holder as standard.

Other safety features include driver, passenger, front side, window and driver's knee airbags, along with fast-reaction LED rear lights and a fire prevention system. The front passenger airbag can also be deactivated.

The LED rear lights complement the height adjustable follow-me-home headlights with titanium grey surrounds, electrically adjustable and heated colour-coded door mirrors and bumpers.

All Alfa Romeo MiTo Turismo versions come with 16" wheels with unique design trims and 195/55 tyres.
Inside the cabin, driver and passengers benefit from manual air conditioning, electric one-touch window operation plus an RDS radio with CD and MP3 reader. There's also an 'auto-close' system to complement the Alfa code immobiliser and alarm system.

Drivers can choose two different cabin colours. A Sprint Black dashboard is complemented by black / grey cloth and a Sprint Red dashboard comes with a black / red cloth combination.

RIDE AND HANDLING - SUSPENSION
Key to the sporting ride and handling characteristics of the Alfa Romeo MiTo is the suspension layout.
Two tried and tested set-ups have been employed - a MacPherson layout at the front and a semi-independent layout with torsion beam at the rear.
In particular, some key elements have been incorporated to give an exclusive feel to the Alfa Romeo MiTo chassis.

To emphasise the promptness of response, stability and control, even under extreme conditions, MiTo's track widths are among the widest in the segment - 1483mm front and 1475mm rear.

The wheel rims are also wide in relation to the size of the tyres in order to optimise the latter's handling performance. The stiff, front and rear springs give the vehicle a sporting yet pliant ride, and the torsion beam features high torsional stiffness to enable it to also act as an anti-roll bar, thereby ensuring optimum roll performance and helping maximise the promptness of response.

However, the most distinctive feature of the Alfa Romeo MiTo suspension is that the front and rear dampers feature coilover springs fitted inside the shock absorber that act in parallel with the main spring during extension travel, with the main purpose of reducing roll and increasing chassis response. Special dual-acting telescopic hydraulic dampers are fitted as standard on all versions.

ENGINES
Three petrol engines - 1.4 16V (95bhp), 1.4 TB (120bhp) and 1.4TB (155bhp) - plus two diesel engines - 1.3 JTDM (90bhp) and 1.6 JTDM (120bhp) - will become available from launch.

Four units are mated to a 6-speed manual gearbox to deliver a punchy, responsive, driving experience, and the remaining engine (1.4 120bhp) is coupled with an equally impressive 5-speed 'box.
Distinguished by its performance, eager throttle response, low fuel consumption, durability and reliability, the new 1.4 turbocharged petrol engine powers two of the five models in the petrol line-up, with two different power outputs.

1.4 16V 95bhp
The entry level - normally aspirated - petrol unit can be specified with each of the three trim levels to deliver a spirited and willing performance.

Developing 95bhp at 6000rpm and a maximum 129Nm of torque at 4500rpm, the 1.4 16V engine is capable of accelerating the Alfa Romeo MiTo from 0-62mph in 11.2 seconds, and on to a top speed of 112mph.
An ideal partner for relaxed, around town driving, this petrol engine is mated to a 6-speed manual gearbox to make longer, motorway journeys more economical and relaxed.
Official mpg figures reveal that in urban driving, the Alfa Romeo MiTo 1.4 16V covers 36.7mpg, while long journeys will push that fuel consumption figure to 58.9mpg. The combined figure is a creditable 47.9mpg.

CO2 emissions are 138g/km and put the Alfa Romeo MiTo 1.4 16V in tax band C.

1.4 TB 120bhp Turbopetrol
New to the Alfa Romeo range, and available with all three trim levels, is a 1.4 turbocharged unit that delivers enhanced levels of driving flexibility and lively performance.

Responsive and satisfying to drive, the new 1.4 TB engine is enhanced by the low inertia of the turbocharger that makes it possible to obtain maximum performance from a throttle command, without the annoying lag typical of this type of engine.
Throttle control for this unit (and the 155bhp version) is drive-by-wire, without any mechanical connection, so that the driver can obtain the desired response from the engine with the greatest energy efficiency.

The 0-62mph sprint takes 8.8 seconds, and in fifth gear, a top speed of 123mph can be attained - impressive figures that have previously been associated with larger engines.

This 1.4 TB unit develops its maximum power of 120bhp at 5000rpm but, more impressively, produces a generous 206Nm of torque at just 1750rpm.
In turn, these characteristics help the Alfa Romeo MiTo to achieve 34.9mpg around town and 56.5mpg in the extra urban cycle, plus a combined figure of 46.3mpg.
CO2 emissions of 145g/km put the Alfa Romeo MiTo 1.4 TB 120bhp in tax band C.

1.4 TB 155bhp Turbopetrol
Only available on Lusso and Veloce versions, the new 1.4TB 155bhp unit is the top performing petrol engine in the Alfa Romeo MiTo range, delivering its maximum power at 5500rpm along with a maximum torque of 230 Nm at 3000rpm.

Quickest of the Alfa Romeo MiTo launch range, this version can accelerate from 0-62mph in just 8.0 seconds and reach a top speed of 134mph.

Despite the increase in power and performance, fuel economy remains notably competitive.
Around town, drivers can achieve 33.2mpg, while motorway journeys and the combined cycle are 53.3 and 43.5mpg respectively.
A CO2 rating of 153g/km puts the Alfa Romeo MiTo 1.4TB 155bhp in tax band D.

1.3 JTDM 90bhp

The latest generation JTDM engines are trailblazing diesel technology and Alfa Romeo is now bringing that expertise to the sporty compact car sector.

1.6 JTDM 120bhp
Representing class-leading diesel technology, this Euro 5-ready 1.6 JTDM 120bhp engine delivers a massive 320Nm of torque at just 1750rpm.

As a result, the engine is perfectly matched for drivers wanting an effective combination of low running costs with useable power and flexibility for authentic driving satisfaction.

Alfa Romeo's new injection system with new-generation variable geometry turbo engines along with the most advanced exhaust gas treatment technologies - Close Coupled Diesel Particulate Filter and an integral EGR (Exhaust Gas Recirculation) system - improves control of temperature and gas flow, simultaneously guaranteeing lower emissions and low fuel consumption.

Alfa Romeo MiTo GTA Concept, 2009

Alfa Romeo MiTo GTA Concept, 2009

 

The Alfa Romeo MiTo GTA Concept, a high performance concept of the new Alfa Romeo MiTo. Designed using the experience gained with the Alfa Romeo 8C Competizione and 8C Spider, the Alfa Romeo MiTo GTA Concept shares with the exclusive "supercar" the philosophy based on achieving the greatest driving pleasure, resulting from exceptional agility produced by a power-to-weight ratio worthy of a racing car.

In line with the famous GTA (Gran Turismo Alleggerito) signature, (Alleggerito means reduced weight in Italian), the Alfa Romeo MiTo GTA Concept prioritises weight reduction, and the achievement of an optimum power-to-weight ratio.
Considerable work has gone into lowering the vehicle's centre of gravity; thus certain components such as the tailgate spoiler, roof and mirror fairings are in carbon-fibre; while aluminium is used extensively in the braking system, suspension, and some parts of the chassis.
Under the bonnet, an exciting new petrol engine, very much in keeping with the pre-requisites of downsizing, environmental awareness, and the offer of high power and efficiency in return for low weight and optimised packaging, powers the Alfa Romeo MiTo GTA Concept.

Designed by Fiat Powertrain Technologies and exploiting the vast experience gained in the production of Twin Spark and Alfa V6 road and race engines, the compact new petrol engine employs advanced technical solutions including direct injection, dual variable valve timing, state-of-the-art turbocharging and advanced electronic management systems to produce a remarkable 240bhp from just 1742cc.

Under-floor aerodynamics have been a particular concern, while the entire car has been lowered by some 20mm. Front suspension employs new geometry with aluminium leading arms, while the rear suspension has all-new bushings, and the comprehensively revised chassis boasts an 'active' suspension system, (advanced damper control), which counteracts the transfer of load under acceleration, stiffening the rear end and maximising traction. The Alfa Romeo MiTo GTA Concept's suspension also interacts with the braking system and steering to obtain the most efficient control of vehicle dynamics, while a 'Sky-Hook' function ensures an excellent level of passenger comfort under conditions of everyday use.

Alfa Romeo Brera S, 2009

Alfa Romeo Brera S, 2009

 

The Alfa Romeo is planning for the new, limited edition Alfa Romeo Brera S.
After a year of intensive suspension and chassis development at Prodrive, the world-leading motorsport specialist, the result is a sports coupe that subtly enhances all that is good about the original Alfa Romeo Brera, while bestowing it with outstanding driver feedback and handling.

Power comes from a choice of two existing direct injection petrol engines - the 185 bhp 2.2 JTS and the 260 bhp 3.2 V6 JTS.
Briefed to make the Alfa Romeo Brera S less of a long-distance tourer and more sporty on UK roads, the engineering team at Prodrive developed a unique suspension set-up. Prodrive engineers meticulously experimented with spring rates and ride heights to match the reduced weights of the 2008 model year Alfa Breras. Then followed an extensive damper tuning exercise to achieve the desired ride/handling balance and steering response required by driving enthusiasts in the UK.

The sports car driving experience is achieved by reducing roll and pitch, flattening the cornering attitude, and subsequently instilling confidence-inspiring steering.
To reduce roll and pitch and achieve an even flatter cornering attitude, Prodrive commissioned bespoke Eibach coil springs and Bilstein dampers.
Spring rates are increased by over 50 per cent compared to the standard Alfa Brera, giving the car a more nimble and agile feel, while the specially tuned gas-filled mono-tube dampers give tighter body control. A careful balance has been created to maintain good compliance over ridges and bumps in the road.

At the same time, the suspension static geometry has also been revised to optimise steering and handling. These changes, together with new 19" alloy wheels and Pirelli PZero Nero tyres, have created a more responsive turn-in to corners, with increased driver feedback, allowing the driver to explore the dynamic limits of the car.
To further enhance suspension geometry, the cars have been lowered by 10 mm front and rear. This lower centre of gravity helps reduce roll and improve cornering and braking performance. In addition, the lowered suspension gives the Alfa Romeo Brera S a more purposeful stance.

At each corner of the Alfa Romeo Brera S, unique Alfa Romeo 8C Competizione-inspired, lightweight 19" alloy wheels have been fitted. Although the wheels are eye-catching, the all-new design was commissioned by Prodrive primarily for performance, rather than just cosmetic appeal. The reason is unsprung weight - the weight carried by the car on the 'road side' of the spring and shock absorber. This plays a significant role in the way the car steers, handles and transmits feedback to the driver.
The lighter the wheel, the better it tracks undulations in the road surface without requiring heavy damping to control it. The unsprung weight has been further reduced by the adoption of hollow anti-roll bars and aluminium suspension components from the Factory.
As a result, the weight of both Alfa Romeo Brera S models is lower than the rest of the range. The front-wheel drive 3.2 V6 JTS is almost 100 kg lighter than the Q4 version and the 2.2 JTS version weighs 35 kg less.
The Alfa Romeo Brera S also sounds different from the standard range. The original characteristic growl of the V6 has been enhanced by careful redesign of the rear silencers. Thanks to a Holmholtz resonator connected in tandem with each silencer, the 2.2 JTS model now emits a sportier yet refined burble.

The exhaust has been altered to mirror the shape of the rear lights. Finished with chrome embellishers, they feature a Prodrive logo on the tailpipe exterior. This is just one of several subtle exterior enhancements to the award-winning Alfa Romeo Brera, including Prodrive branded front stone deflectors, and a bespoke red 'S' or 'SV6' on the C-pillar.
Inside the 3.2 V6 JTS Alfa Romeo Brera S, changes are more obvious. Not only are the supportive sports seats upholstered in soft black Frau® leather with red stitching, so are the dashboard fascia, door panels, steering wheel and gearlever. The centre console and instruments are faced in a dark finish. This interior can also be specified on the 2.2 JTS version.

Foot pedals are fashioned from drilled aluminium and the headrest recess houses a limited edition Brera S aluminium plate, featuring the flags of Italy and Britain.
For the record, the 2.2 JTS and 3.2 V6 JTS Alfa Romeo Brera S can reach 62 mph from rest in 8.6 and 7.0 seconds respectively, on the way to maximum speeds of 139 and 155 mph.

Alfa Romeo 159 Sportwagon, 2009

Alfa Romeo 159 Sportwagon, 2009

 

 

Alfa Romeo 159 is an exclusive sedan combining refined Italian style with the "elegant sportiness" of Alfa Romeo. The Alfa Romeo 159 Sportwagon on the other hand combines the style, performance and handling of a genuine sports car with the flexibility of use and luggage space versatility of a prestigious station wagon.

The versions exhibited offer two new Euro 5 compliant engines which will be available from the beginning of April: the 1.75 liter 200 HP TBi engine and the 2.0 liter 170 HP JTDM engine. In detail, the Alfa Romeo 159 is fitted with the new 1.75 liter TBi engine (Euro 5) - maximum output 200 HP from 4750 to 5500 rpm and maximum torque of 320 Nm at 1400 rpm - giving it a maximum speed of 235 km/h and acceleration of 0 to 100 km/h in barely 7.7 seconds.

The powerful Alfa Romeo 159 sedan is offered in the TI sporting version, featuring lowered geometry, bigger tires, 19 inch alloy rims, miniskirts and large aluminum brakes with red calipers. So, a very determined-looking car with a decidedly "ground-hugging" look. Inside, the TI environment is recognizable from the shaped sports seats in perforated leather with the Alfa Romeo logo stitched in red, plus the steering wheel with sports grip and the gear knob covered in leather with red stitching.

The internal coverings are black and the insignia are in "brushed dark aluminum". The same impression of sportiness appears in the instrument panel graphics, the pedals and the aluminum scuff plate with TI logo. Finally, this particular version comes with high-end equipment including triple-zone climate control, VDC system with Electronic Q2, Blue&Me Nav GPS and entertainment system, Bose Hi-Fi system and Cruise Control.

Next to this car, the public can admire an Alfa Romeo 159 Sportwagon equipped with the new 2.0 liter 170 HP JTDM engine (Euro 5). With this engine, the car can reach 216 km/h and takes 9 seconds to accelerate from 0 to 100 km/h. The version displayed at Geneva is a Sport which is differentiated from the outside by the exclusive 18 inch alloy rims with the new "Turbine" design.

Inside,

the eye is caught by the sports steering wheel with radio commands, the gear knob covered in leather with black stitching and the new sports seats covered in leather. Giving a further impression of sportiness, the head lining, the parcel shelf and the pillar fairings are black, while the badges are in "brushed aluminum" and the instrument panel employs "sporty" graphics. Finally, the equipment (standard and optional) offered on this car is very high-spec: triple-zone climate control, Cruise Control, VDC system (with Electronic Q2), Bose Hi-Fi system, GPS system (with telephone and voice commands), and Visibility Pack (rain, mist and twilight sensors).

Brabus E V12 Coupe, 2010

Brabus E V12 Coupe, 2010

 

At the Geneva Motor Show 2010 the Brabus E V12 Coupe celebrates its world debut as the world's fastest Gran Tourismo. Based on the new Mercedes E-Class Coupe, Brabus builds a luxurious 2+2-seater in small-series production. It is powered by a Brabus SV12 R Biturbo 800 twelve-cylinder displacement engine that produces 800 hp (788 bhp) / 588 kW of power and a peak torque of 1,420 Nm (1,047 lb-ft). Brabus accepted by the German Federal Vehicle Registration Agency (Kraftfahrtbundesamt) as an automobile manufacturer, offers this high-performance automobile capable of reaching speeds in excess of 370 km/h (230 mph) starting at 478,000 Euros MSRP.

Like the fourth-generation Brabus E V12 sedan the new E V12 Coupe is powered by a Brabus SV12 R Biturbo 800 displacement engine. Drawing upon decades of experience in developing and building high-performance vehicles the twelve-cylinder engine was fitted into the engine bay of the two-door E-Class.

The basis for this engine is the twelve-cylinder twin-turbo engine from the latest Mercedes 600 models. Displacement of the engine is increased from 5.5 to 6.3 liters (336 to 384 cu. in.) with the help of a special crankshaft, larger cylinder bore and correspondingly larger pistons. Both three-valve cylinder heads are optimized for mixture flow, and fitted with sport camshafts.

Underneath the custom-made hood with integrated carbon-fiber RAM airbox is space for a completely newly developed air intake system. This twin-turbo system was designed from the ground up for the new E V12 generation. It includes two custom high-performance headers with integrated turbochargers and four water-to-air intercoolers. The stainless-steel high-performance exhaust system with free-flow metal catalysts was also custom-tailored for the confined space under the E-Class Coupe.

In addition, the Brabus engine specialists have developed a precision engine management system that controls injection, ignition and driving dynamics systems. The result is an optimal combination of impressive power yield and eco-friendly emissions that meet strict EURO IV exhaust limits.

The Brabus SV12 R Biturbo 800 engine is lubricated with high-tech motor oil from technology partner ARAL. It produces a rated power output of 800 hp (788 bhp) / 588 kW at 5,500 rpm. The even more impressive peak torque of 1,420 Nm (1,047 lb-ft), available already at a low 2,100 rpm, is limited electronically to 1,100 Nm (811 lb-ft).

Power is transferred to the rear wheels via a reinforced five-speed automatic transmission and a Brabus high-performance limited-slip differential. The Brabus E V12 comes standard with state-of-the-art driving stability programs that can be deactivated at the push of a button.

Performance of the coupe is as exceptional as that of the four-door model: The Brabus E V12 Coupe sprints from 0 - 100 km/h (62 mph) in just 3.7 seconds, to 200 km/h (124 mph) in 9.9 seconds, and reaches 300 km/h (186 mph) after a mere 23.9 seconds. For street-legal use the top speed of the Gran Tourismo is limited electronically to 350 km/h (217 mph). Without the limiter the two-door twelve-cylinder car is capable of speeds in excess of 370 km/h (230 mph).

This extreme performance also places highest demands on the vehicle's aerodynamic properties. The Brabus designers went into the wind tunnel to develop a body conversion kit made from high-strength yet especially lightweight carbon fiber. The kit combines sporty design and aerodynamic efficiency to perfection.

The Brabus front was designed to reduce lift on the front axle and to provide all radiators of the V12 with an optimal supply of cooling air. Air outlets in the sides route the air quickly away from the heat exchangers. Another important design feature was to provide the front brakes with cooling air. Integrated LED daytime running lights further increase active safety.

A wider track means better directional stability at high speeds. Because of that Brabus has developed special carbon-fiber sport fenders with integrated air vents for the front axle. Special carbon-fiber rear fenders add 60 millimeters (2.4 in.) to the width of the coupe on the rear axle. The Brabus E V12 Coupe runs on especially wide wheels fitted with high-performance tires from Pirelli or YOKOHAMA. The 19-inch combination is perfect for the enormous top speed the car is capable of. The wheels are 9.5 inches and 10 inches wide and customers can choose from Brabus Monoblock designs VI, E, Q and S. Tires in size 265/30 ZR 19 are mounted on the front axle. Size 285/30 ZR 19 tires on the rear axle provide optimal traction.

Rocker panels with integrated illuminated Brabus logo and LED entrance lights route the air stream along the sides with minimum turbulence. They also lend the two-door car a longer, sleeker appearance.

The Brabus rear apron with carbon-fiber diffuser features a centrally mounted reflector and custom-tailored cutouts on either side for the Brabus quad sport exhaust system. The Brabus rear spoiler is essential for well-balanced aerodynamics at high speed.

To make the Brabus E V12 Coupe not only a superior road warrior but upon request also an extremely sporty racer on the track the suspension was completely redesigned. The redesign includes special suspension components on front and rear axle that offer a wider range of individual suspension settings.

These measures are complemented by a Brabus coil-over suspension that features a multitude of selectable settings for bound and rebound. The shock absorbers on the front and rear axle feature ten selectable settings for bound and rebound. The ride height has an adjustment range of 35 millimeters (1.4 inches). Sport sway bars can further minimize body roll during fast cornering.

The Brabus high-performance brake system meets the toughest demands, on the road or on the track. The front axle features 12-piston aluminum fixed calipers and vented and grooved steel brake discs measuring 380 x 37 millimeters (15.0 x 1.5 inches). The rear axle stops on six-piston aluminum fixed calipers gripping discs measuring 360 x 28 millimeters (14.2 x 1.1 inches). The Brabus high-performance brake system incorporates all functions of the standard Brake Assist system of the Mercedes E-Class.

The interior combines sporty character with luxurious ambiance. An ergonomically shaped sport steering wheel is part of the equipment list of the Brabus E V12 Coupe as are sport seats upholstered with the finest leather. The seats provide excellent seating comfort and lateral support.

Genuine carbon-fiber trim on dashboard, center console and doors adds further sporty highlights.

Bentley Continental GT Speed, 2008

Bentley Continental GT Speed, 2008

 

The Bentley Continental GT Speed is the most powerful production Bentley ever and the first to top 200mph (322km/h). A potent addition to the company's highly successful Continental series, the GT Speed extends the appeal of the Continental GT coupe to driving enthusiasts who place a high value on outright performance and agile handling.

The exterior style of the new Bentley Continental GT and GT Speed models is defined by a wider, lower air intake and more upright radiator grille that also provide increased airflow to the more powerful GT Speed. Its 600bhp (610PS) W12 engine develops 15 percent more torque and nine percent more power than the standard Continental GT, while engine efficiency is optimised by the use of lower friction, lighter-weight components and a new engine management system. The resultant performance is exceptional, with a top speed of 202mph (326km/h), a zero to 60mph sprint time of just 4.3 seconds (0-100km/h in 4.5s) and effortless overtaking capability.

Complementing the Bentley Continental GT Speed's high performance is its unique chassis tune that delivers tauter handling and improved agility, with new, wider 9.5J 20-inch wheels and bespoke performance tyres as standard fitment. Fade-resistant carbon ceramic brakes are available as an option. Subtle design touches, including a dark-tinted front grille and larger sports tailpipes, reinforce the sporting character of the Bentley Continental GT Speed.

Inspiration for the Bentley Continental GT Speed came from the legendary 'Speed' models that first appeared in 1923. The standard Bentley 3-litre had already established Bentley's engineering superiority in terms of roadholding, handling and braking, but W.O. Bentley, the company's founder, recognised the market potential for a more potent version aimed at the enthusiast driver who demanded superior performance. His response, the 3-litre 'Speed Model', complete with twin SU carburettors and a higher compression ratio engine, became one of the most coveted of all Bentleys.

Both the Bentley Continental GT Speed and the 552bhp (560PS) Continental GT benefit from internal efficiency improvements to deliver reduced fuel consumption and CO2 emissions. The Continental GT remains outstandingly quick - its top speed is unchanged at 198mph (318km/h), with a 0-60mph sprint time of 4.6 seconds (0-100km/h in 4.8s).

The all-wheel drive Bentley Continental GT changed the face of the luxury coupe market and attracted a wider audience to the Bentley marque. It also represented the first step in Bentley's renaissance, positioning the company at the pinnacle of both technology and consumer aspiration. Since its launch, demand for a sportier version of the Continental GT was met by the successful introduction of the 2005 GT Mulliner Driving Specification and the limited edition GT Diamond Series in 2006, to celebrate 60 years of Bentley at Crewe. Now, with the launch of the Bentley Continental GT Speed, customers will enjoy even greater choice. Bentley Chairman and Chief Executive Dr Franz Josef-Paefgen welcomes the expansion of the Continental GT model offering: "The Continental GT is a highly successful, modern-day Bentley icon. The new Bentley Continental GT Speed, with its harder-edged character and sportier driving experience, builds on this success."

Engine enhancements for all Bentley Continental GT models
At the heart of both Bentley Continental GT models is the Bentley 6-litre, twin turbocharged W12 engine, the most compact 12-cylinder engine in production. The 48-valve head employs four camshafts and continually variable valve-timing. Power is transmitted via a ZF six-speed automatic transmission.

A host of engine and transmission enhancements have been introduced on the 552bhp (560PS) Bentley Continental GT to enhance both the refinement and efficiency of this high technology powertrain. These :

    * New crankcase design to reduce internal losses.
    * More efficient catalyst and exhaust system for improved emissions.
    * Lighter weight single chain drive for camshaft.
    * New engine management system and faster response cam sensor.

For the Bentley Continental GT, the engine continues to produce 552bhp (560PS / 412kW) at 6100 rev/min and a maximum torque of 650Nm (479lb ft) from1600 rev/min. The twin, low-inertia turbochargers are a key factor in producing the flat torque curve, characteristic of every Bentley.

A new higher output of the W12 engine is specified for the Bentley Continental GT Speed, sharing engine efficiency improvements with the GT model. New lighter weight con rods enhance engine response, while new pistons, with anodised compression ring grooves, are designed to withstand increased cylinder pressures. Together with a recalibrated version of the new engine management system, the Bentley Continental GT Speed develops nine percent more power than the GT - 600bhp (610PS) at 6000 rev/min. The maximum torque of 750Nm (553lb ft) at 1750 rev/min represents an increase of over 15 percent versus the standard engine. As a result, the Bentley Continental GT Speed becomes the first production Bentley to top 200mph (322km/h), with a V-max of 202mph (326km/h).

Both the Bentley Continental GT Speed and GT models now produce lower CO2 emissions of 396g/km, down from 410g/km, an improvement of 3.5 percent. Fuel consumption is improved by a similar amount.

Brian Gush, Director, Chassis and Powertrain, says the two new models offer something for every Bentley enthusiast: "The Continental GT will continue to be the benchmark for the luxury coupe class, offering an unrivalled blend of performance and refinement. The new Bentley Continental GT Speed is a true driver's car with immense power and superb handling."

The advanced ZF 6HP26 six-speed automatic gearbox has the ability to lock up its torque converter during normal driving conditions replicating the immediacy of a manual transmission while maintaining the smoothness of an automatic. A manual override function allows clutchless manual changes via the gearlever or steering wheel paddles.

Providing huge levels of grip and stability in all weather conditions, the all-wheel drive system harnesses the prodigious power and torque of both the Bentley Continental GT and GT Speed coupes. The system uses a central Torsen differential and a differential on both the front and rear axles providing a standard 50:50 torque split. This front to rear ratio is variable depending on the available grip and the system can sense slip of less than one percent and react by apportioning the engine's torque to either the front or rear axle.

The advanced electronic stability programme (ESP) has been uprated to ESP 8.1 for both models. The Bentley Continental GT has a new "Sport Traction" mode that moderates ESP intervention at low speeds, providing a greater degree of driver interaction and control. This is particularly beneficial from standing starts, for example when pulling away uphill on low traction surfaces.

The Bentley Continental GT Speed offers a new 'Dynamic Mode' that allows increased wheel slip at higher speeds than the 'Sport Traction' mode on the standard chassis. Torque is reinstated more quickly after the traction control system is triggered, giving the spirited driver a greater sense of control and the ability to exploit the full potential of the new engine.

Highly tuned suspension for outstanding handling
Chassis, suspension and steering modifications for both the Bentley Continental GT and GT Speed models ensure they have the handling to match their formidable powertrains. Both are suspended on double wishbones at the front and a trapezoidal multi-link system at the rear. Much of the suspension is made from lightweight aluminium. The Bentley Continental GT Speed model also benefits from a solid-mounted front subframe, while high-stiffness aluminium front uprights are common to both models. Together with stiffer rear suspension bushes these deliver even sharper handling characteristics. The Bentley Continental GT Speed also features modified front and rear anti-roll bars to minimise understeer and optimise handling balance.

Self-levelling air suspension that constantly monitors and adjusts the ride height and damping according to road conditions is common to both models, although the Bentley Continental GT Speed is engineered to sit 10mm lower at the front and 15mm lower at the rear to improve handling dynamics. Uprated springs and dampers, together with revised software control, further improve the agility and body control of the Bentley Continental GT Speed.

All-new 9.5Jx20-inch alloy wheels with bespoke Pirelli P-Zero tyres have a major effect on the GT Speed's steering and grip levels. The wider wheel and reduced tyre wall profile improve the tyre's lateral stiffness giving noticeably sharper steering response and feel. The new Pirelli performance tyres are developed specifically for the Bentley Continental GT Speed and benefit from a unique construction and rubber compound for enhanced levels of grip.

Both the Bentley Continental GT and GT Speed benefit from changes to the rack and pinion steering. Revisions to the system's hydraulics reduce friction and improve steering feel, while a new version of the speed-sensitive Servotronic system also increases levels of feedback to the driver.

Secondary ride levels - the response of the car to poor road surfaces, pot holes or cats' eyes, for example - have been improved on the 552bhp Bentley Continental GT model with the addition of low friction dampers. And even though the new Bentley Continental GT Speed has stiffer, lowered suspension its ride quality is on a par with the 2007 Bentley Continental GT.

The Bentley Continental GT and GT Speed are both equipped with the largest brakes of any production passenger car on sale today. The ventilated front discs have a 405mm diameter and are 36mm thick. Ventilated discs are also used at the back, with a diameter of 335mm and a thickness of 22mm.

For both models, the performance boundaries are further extended by Bentley's optional carbon/silicon carbide brake system. Boasting 420 x 40mm carbon-silicon carbide, cross-drilled front discs and 356 x 28mm rears, with eight-piston callipers, the new brakes are even larger than the standard system. The system provides a 20kg reduction in rotating and unsprung mass, benefiting steering response and handling.

The lightweight, fade-resistant braking system minimises disc distortion under high thermal conditions. Under normal driving conditions the brake discs will last the lifetime of the car. Furthermore, brake pad life is doubled compared with the standard braking system.

Complementing the braking systems of both Bentley Continental GT models are sophisticated safety systems, including Hydraulic Braking Assistance (HBA), anti-lock braking (ABS), drag torque control (MSR) and Electronic Brakeforce Distribution (EBD). The latter monitors the level of grip available to each tyre and apportions braking force accordingly. This not only helps reduce stopping distances but also greatly enhances the control enjoyed by the driver under heavy braking.

Subtle changes to acclaimed coupe design
The Bentley Continental GT Speed is distinguished from the Continental GT by its dark-tinted chrome matrix grille to the main and lower air intakes. Bright chromed grilles may be specified at no extra cost. At the rear, a black lower bumper valance and wider, rifled exhaust tailpipes emphasise the Bentley Continental GT Speed's sporting character, reinforced by new multi-spoke 20-inch sports alloy wheels. As an option, these may be specified with a dark chromed finish.

The Bentley Continental GT Speed's cabin is based on that of the Mulliner Driving Specification (a cost option on the standard GT). It includes a choice of veneers (Burr Walnut, Dark Stained Burr Walnut and Piano Black), Diamond-quilted hide seats with embroidered Bentley emblem, indented hide headlining, a sports alloy gearlever, three-spoke multi-function sports steering wheel, drilled alloy foot-pedals as well as 'Speed' logos to the treadplates.

A range of Mulliner options provide further opportunities for personalisation including fascia panels, header and centre console in bright aluminium or, unique to the Bentley Continental GT Speed, dark tint aluminium (compatible only with Dark Stained Burr Walnut veneer or Piano Black veneer and single tone interior colour scheme). The Bentley Continental GT also benefits from a new Bentley 'B' brake pedal.

Morgan Roadster 3.0 V6, 2004

Morgan Roadster 3.0 V6, 2004

Morgan Roadster 3.0 V6, 2004

The Morgan Roadster is a car produced by the Morgan Motor Company.
It was introduced in 2004.

Dimensions
* Length : 4010 mm
* Width : 1610 mm (standard wheels)
* Height : 1220 mm

Fuel
* Fuel Tank Volume : 55 litres (12 imperial gallons)
* Fuel Consumption :
o Urban: 20.3 mpg imperial (13.91 l/100 k
o Extra Urban: 38.17 mpg imperial (7.40 l/100 km)
o Combined: 28.9 mpg imperial (9.77 l/100 km)
* CO2: 231.8

Engine
* Configuration: 3.0 litre V6 24 valve
* Bore x stroke, mm: 89 x 79.5
* Engine capacity, cm³: 2967
* Max output EEC: 166 kW (226 hp) at 6150 rpm
* Max torque EEC: 206 N·m 280 (lbf·ft) at 4900 rpm
* Power-to-weight ratio: 240 hp/t, kW/t
* Torque to weight ratio: 199 lbf·ft/short ton, 297 N·m/t

Performance

* 0 - 100 km/h (62 mph) 4.9 s
* Top speed 134 mph (215 km/h)

Mazel Identity i1, 2006

Mazel Identity i1, 2006

The Identity i1 has made concrete a proposal which is not only the answer to the challenge of a new model realization but also to the creation of a new brand, a goal which is not easy to reach today.

H2R Design Consulting have studied the concept of the car, developing the design completely in Virtual Reality, and MAZEL-GROUP have executed the physical model. Both companies, located in Barcelona, demonstrate with this project their high technological capacity in the execution of this kind of projects.

The chassis, studied in composite material will be developed with ATR, a prestigious Italian company with a great experience in this field. The development of the body in white (in RTM and composite material) is on its execution phase by Studio Linea 2 in Turin (Italy)

The engine, an aluminum eight cylinder in central position with rear wheel drive with an robotized six gear Gearbox guarantees high performances and an excellent road performance.

The exterior, following the best European tradition, is characterized by generous dimensions (4,43m long per 1,92m wide, is only 1,26 m high) combined with the remarkable tires size of 19" in the front and 20" in the rear, gives the car an exclusive and sporty image. Furthermore the strong character of its designs originates not only a "pure race" sports car but also a design able to characterize a whole new brand.

The front part, consisting of three main volumes, have a lower main air intake, clearly inspirited in aeronautical solutions, which is, beyond all doubt, its most important part. The remarkable intakes for the front brake refrigeration makes up a dynamic ensemble with a strong sports character. The upper air intake, refined and perfectly integrated in the bumpers volume and the head lights in vertical position, emphasize the important width of the vehicle.

The side part is characterized by a new treatment of the surfaces, bringing together new design trends and classic solutions, which permits to obtain a product really different in relation to the solutions actually on the market. The doors, which are opening vertically, reinforce its extremely personal presence. Here, the perfectly integrated external mirror has a new lighting system developed by FICOSA.

The rear part, characterized by its separated rear lights and its remarkable lower engine cover part which is used as an air outlet conductor with a ventury effect, is easily recognizable from afar. This contribute to reach the purpose to make a car with an own, strong character.

The interior, a two seats, has been developed against the traditional solutions searching a sporty elegance combined with a high sensation of space, using a new distribution of the internal mechanical components.

All the control components of the vehicle are situated in the central panel where the Shift by Wire and the Brake by Wire solutions have permitted a new distribution of the gear and hand brake in the interior of the vehicle. This solution gives a new drive sensation. These elements have been developed by FICOSA, who also cooperated with the realization of the design.

Loremo LS Concept, 2006

Loremo LS Concept, 2006

The Loremo is a lightweight vehicle whose development has taken a radical new direction: less is more and the most efficient use of energy is not to use it at all. From this motive new ideas sprang which gradually made it into the design. Even the name Loremo - Low Resistance Mobile - speaks of its streamlining and economy.

The Loremo's construction handbook would make an excellent diet recipe. Slim lines and no unnecessary ballast distinguishes the Loremo from all other cars. Its superior safety concept, excellent aerodynamic characteristics, revolutionary bodywork, the linear cell structure, and a radically new rear-axle keep it in form. It combines the economy of a compact car with the handling and feelings of a sports car. The Loremo LS - light and simple is a car which awakens emotions and yearns for sinuous roads.

Bodywork and chassis concept
The 95kg (209 lb) lightweight steel chassis - a patented linear cell structure - is one of Loremo's key elements. It performs well-above average in crash simulations and provides excellent handling characteristics with its low center of gravity and torsional stiffness. Longitudinal supports, extend at fender height along the length of the entire vehicle, increase stability and ensure that the linear cell structure remains practically undamaged in offset and side crash-tests. The centrally mounted cross-support, on which the roll bars are mounted, stiffens the longitudinal beams and houses the engine.

The non-load-bearing, self-supporting, thermoplastic body panels mould to the linear cell structure and help the Loremo to achieve its aerodynamic shape. This material has a number of advantages: it is light weight, weatherproof, scratch-resistant and it is economical. It substitutes the classical paint by a thin film, in the color of the car, during the manufacturing process. In this way the Loremo receives a high-quality, paint-like surface without environmental- damaging paints.

The intelligent, chassis air-guiding system is perfected with the help of lower tire fins and by the air stream optimized chassis design. The Loremo achieves its optimum driving characteristics with its minimized wind resistance and reduced buoyancy.

Design
Not only is the energy efficiency reflected in the dynamic, elegant lines of the Loremo but also in its sporting nature. The distinctive, powerful front stretches softly into the extended rear. There is no B-pillar as the panorama roof has no load-bearing function and is simply bolted to the roll-bar. The nose close to the street does away with a monstrous radiator grill and instead an opening provides access to the aerodynamic underside. The LED headlamps give the vehicle both a distinctive look as well as exhibiting tomorrow's display technology.

Unusually the car is entered from the front for which the entire hood of the car including the windshield is tipped forwards, allowing for upright boarding to the interior. The opened front shows the trunk, which also provides additional 600 mm (24 in) of crumple zone. The vertically- opening tailgate provides the entry to the back seats.

Interior
The Janusseater - two seats are in front of the pyramidal cross-support and two rear-facing behind it - is equipped with super-light ergonomic seats. The seats, embedded in the linear cell structure, create a feeling of sporty security and comfort. There is plenty of room for sporting equipment or for additional suitcases, if the rear-facing seats are not with passengers.

The spartan, sporty interior design does away with unnecessary fittings and its two-ply plastic construction doesn't need any additional finishing. High-quality interior furnishing in alcantara and high-tech fabrics provides spacious luxury and comfort.

If required the Loremo LS can be equipped with a simple air-conditioning system, an on-board PC with navigation system, an mp3 player, and a driver information system.

Technology
Of particular note is the rear differential-link axle, specially-developed for the Loremo, which combines the advantages of longitudinal- and semi-trailing link axles. With maximum load, the axle is indifferent to toe and camber at full suspension compression. In curves, however, the wheel leans inwards to achieve better lateral traction. An optimal load distribution of 50:50 is achieved by placing the motor centrally and 105/70 R14 low-profile tires give good road holding and perfect straight-line driving.

The 20 PS (15 kw) two-cylinder turbo-diesel motor powers the 450 kg (204 lb) light Loremo LS to up to 160 km/h (100 mph). It accelerates from 0 to 100 km/h (63 mph) in 20 s and its aerodynamic form achieves a Cw value of 0.20. Fuel consumption: tiny 1.5 liters for 100 km (157 mpg)! Thus the Loremo can travel from Munich to Rome (over 800 miles) on only one 20 liter (5 gallon) tank of fuel.